Organization
This manual contains the following chapters.
Chapter 1:
Introduction - provides an introduction to GPS and DGPS technology, and the Vector
Sensor system.
Chapter 2:
Installation - describes how to install the Vector Sensor, Vector Antenna Array, MBL-3,
and provides a foundation for interfacing it with an external navigation system or similar device.
Chapter 3:
Overview - provides details on the fundamental operating modes of the Vector Sensor
system and its associated default parameters.
Chapter 4:
Operation - describes how to configure and operate the Vector Sensor receiver.
Chapter 5:
PocketMAX Utility - describes the general usage of the CSI Wireless PocketMAX
utility with the Vector Sensor.
Chapter 6:
NMEA 0183 - describes the subset of NMEA 0183 commands and queries used to
communicate with the Vector Sensor.
Chapter 7:
Frequently Asked Questions - This chapter provides answers to frequently asked
questions about the Vector Sensor system.
Chapter 8:
Troubleshooting - provides you with diagnostic information to aid in determining a
source of difficulty for a particular installation.
Appendix A - Specifications:
Appendix B - Interface:
devices.
Appendix C - Introduction to GPS and SBAS:
relating to GPS and SBAS.
Appendix D - Resources:
for the advanced user.
Index
The
provides a listing of the locations of various subjects within this manual.
Customer Service
If you encounter problems during the installation or operation of this product, or cannot find the
information you need, please contact your dealer, or CSI Wireless Customer Service. The contact
numbers and e-mail address for CSI Wireless Customer Service are:
Telephone number:
Fax number:
Vector Sensor Reference Manual
Details the technical characteristics of the Vector Sensor system.
Provides instructions to interface the Vector Sensor with external
This appendix lists a number of different resources that may be useful
+1-403-259-3311
+1-403-259-8866
Provides both general and specific information
xv
Need help?
Do you have a question about the Vector Sensor and is the answer not in the manual?