Advertisement
What is the worst case power draw of the camera?
The cameras draw 22W while the batteries are charging.Otherwise, they draw only 12W during
operation.
MIRO JBOX 2. 0 FAQS
Which camera can I use with the Miro Junction Box?
The Miro Junction Box (JBox 2.0) accepts all Miro and VEO S Model cameras – The Miro C321J
uses a System Cable, all other Miro and VEO S cameras require an Adapter Cable. Please note
that the Miro JBox cannot accept other Phantom cameras.
If boxes are connected together, how many power sources are
needed?
Each JBox 2.0 needs its own power source, such as a power supply, even if they are connected
together.
BA SIC TROUBLESHOOTING
There are fixed black spots on the image, par ticularly at small
aper tures.
This is most likely caused by dust particles stuck on the sensor or OLPF (optical low pass filter)
surface. The best way to check is to remove the lens and look at the glass surface with a bright
light source. Vision Research recommends not to use canned air or cotton swabs to clean the
sensor surface. It is safer to use a manual bulb-style air blower and/or sensor cleaning brush
for removing loose dust particles.
Additional tips for cleaning sensors can be found in the maintenance section of this manual.
T R O U B L E S H O O T I N G
Chapter 9: Suppor t | 61
Advertisement
