Advertisement
Phantom cameras are typically controlled with PCC software through a dedicated Ethernet
network. PCC is compatible with the 64-bit version of Windows 10 operating systems.
The latest version can be downloaded at: www.phantomhighspeed.com/PCC
ASSIGNING A Gb CAMERA NETWORK
Connecting the camera using Gb Ethernet simply requires the computer to detect the IP
address range of Phantom cameras.
PCC software includes a Network Configuration Utility which will launch automatically after
the software is first installed, or it can be later launched from the PCC program itself.
The NetConfig Utility will show all network interfaces currently installed in the PC.
Identify the one that will be physically connected to the camera (this process can be done
with or without a camera connected at the time).
Click 'Config Adapter', which will then adjust the IP Address and Subnet to the first one
available within the 100.100 network that all Phantom cameras are pre-configured to
work with. Once connected, the Phantom logo will appear on the lower right with the
"Configured for PCC operation" message.
OPTIONAL: MANUALLY A SSIGN Gb CAMER A NE T W ORK
Alternatively, In the Windows 'Network and Sharing Center,' select the camera network.
Change the Ethernet IP settings by selecting 'Properties,' then 'TCP/IPv4' 'Properties,'
then select 'Use the following IP address.'
Enter IP address 100.100.100.1 and Subnet 255.255.0.0. Other settings should be blank.
Chapter 3: Quick Star t Guide | 9
Advertisement
