Advertisement
CABLES FOR JUNCTION BOX 2.0
System Cables: Phantom system cables have differential signals for signal integrity over
longer distances. They are capable of transporting: Power, Ethernet, and IRIG, FSYNC,
Strobe, Ready, Memgate and Event signals. They have a rugged casing and the same
Fischer connect at each end, one in a 90
end connects directly to any port on the JBox 2.0. The other end connects directly to
either:
•
Miro C321J, N5 N-JB Base, C320J, or C210J
•
Adapter cable
Adapter Cables: Phantom adapter cables connect VEOs and non-J Miro C cameras to a
System cable for connection to a JBox 2.0. The adapter cable is approximately 0.6M (2Ft)
and connects to the power and capture ports of the camera and mates with a system
cable. The cameras it supports are:
•
All VEO S-Models
•
Miro C321, N5 N-B Base, C320, C210
JBox Connector Cable: This small cable is perfect for connecting 2 JBoxes that are
immediately next to each other. It is a System cable that is only 0.6M (2Ft) long with both
connectors at 90
and the other to the System port of the next JBox.
Vision Research, Inc. | Miro C 321/C 321J/N5/JBox 2.0 Camer a Manual
angles. One connector attaches to a camera port of the master JBox,
˚
angle and the other in a straight format. Either
˚
System cable, Adapter cable,
Short cable to link JBoxes
Advertisement
