Advertisement
BNC connector; closed' for ready, 'open' for not ready; covers all cameras
A
READY
connected to this JBox and any JBox up-chain of this one.
BNC connector; contact closure causes trigger. BNC connector also
B
TRIGGER
accepts TTL pulses (rising / falling edge) for trigger. There is also Trigger
on System connector: isolated, <1V deassert, 3 to 24V assert.
Selectable strobe or FSYNC for synchronization with equipment such as pulsed
C
AUX
LED lighting.
Ruggedized RJ45 connector connects GigE to acontrol unit computer /
D
ETHERNET
laptop for camera control communication.
Same Fischer connector as Camera port. Connects to a Camera Port on
E
SYSTEM
second JBox to daisy chain or branch the system for additional cameras.
F
POWER 20-36VDC
Fischer connectors; each Miro JBox has six (1-6) Camera ports which carry
G
1
Ethernet, power, serial, and Miro camera signals on capture connector. There are
two status LEDs for each camera port – Ethernet and camera status. One port can
H
2
be used to daisy chain or branch to another JBox's System port.
I
3
J
4
K
5
L
6
Protected for reverse polarity, overcurrent (10A), undervoltage
and overvoltage to 50V. Independent power is required for each
Junction Box.
Chapter 2: Connectors | 7
Advertisement
