Ametek PHANTOM Miro C321 User Manual page 29

INTRODUCTION TO SIGNALS
Phantom cameras incorporate multiple hardware signals to interface to external devices.
Ports on Phantom Miro C321 cameras are programmable. The equipment to access these
ports – the MiniBoB, Control BoB, and Junction Box – have ports that are either fixed or
programmable. The Programmable I/O ports have a default setting which will be set after
a factory reset or by using the 'signal default' function in PCC.
Port Map for Programmable I/O Access
Port Label
Trigger
TC In
TC Out
Aux 1
Aux 2
Port Label
Trigger
TC In
Ready
TC Out
Aux Out
Aux In
MINIBoB
Default setting
Trigger
TC In
TC Out
Strobe
Ready
CONTROL BoB
Default setting
Fixed
Fixed
Ready
TC Out
Strobe
N/A
Programmable
I/O Capability
Fixed
Fixed
Prog. I/O
Prog. I/O
Prog. I/O
Programmable
I/O Capability
Fixed
Fixed
Prog. I/O
Prog. I/O
Prog. I/O (out)
Prog. I/O (in)
Chapter 6: Signal s & Programmable I/O | 25
Programmable
IO Port in PCC
Port 1
Port 2
Port 3
Port 4
Port 5
Programmable
IO Port in PCC
Port 1
Port 2
Port 5
Port 3
Port 4
Port 4