Download Print this page

Ametek PHANTOM Miro C321 User Manual page 64

Advertisement

MIRO C FAQS
What is the difference between the Miro C321Jand Miro C321?
The difference is in the connections. The Miro C321J must be operated through a system
cable to the Miro Junction Box and does not have a separate power connector. It is the
perfect, lowest cost solution for a system of multiple connected cameras. The Miro C321
has the same 3 connectors as other Miros. It can be powered and operated independently,
or, with a Miro C Capture cable, it can also connect to the Miro Junction Box.
Otherwise, the Miro C321J and Miro C321 are the same.
Set Default CSR?
The Miro C's do not have a mechanical shutter. This allows them to be as rugged as they
are but can make a CSR for good image quality inconvenient because you need to cover the
lens. When you turn the camera off, the CSR returns to the factory default.
For customers that rarely change their camera settings, the "Set new CSR default" feature
provides a convenient alternative to this process. You must operate the camera at full
resolution, for example 1920 x 1080 for the C321. You may then set the CSR for the frame
rate and exposure time you are using. That CSR will remain through turning the camera off
and on, for as long as you don't change that setting. Always run at 1000 fps and a certain
exposure, for example? Set CSR once, get great image quality, and don't worry about it
again, no matter how many times you turn the cameras on and off.
Can I use my F-mount lens with the Miro C-Series cameras?
Yes, with a converter. The Miro C's come with a C lens mount that can be reversed to
become a CS lens mount. To use an F-mount lens, you can purchase a converter (part
number VRI-FMNT-CMNT).
Does the MiniBoB work with these cameras? What signals are
available?
The Miro C321J does not use a MiniBoB, because it receives signaling from the JBox 2.0
through the System cable. The Miro C321 can use the MiniBoB.
The signals available to both cameras are:
Trigger
F-Syn
F A Q S
Vision Research, Inc. | Miro C 321/C 321J/N5/JBox 2.0 Camer a Manual
Memgate
Ready
IRIG In
Strobe
IRIG Out
Event
T

Advertisement

loading

This manual is also suitable for:

Phantom miro c321jPhantom miro n5Phantom miro jbox 2.0