Advertisement
Step 1: Enable in PCC:
FINE-TUNE SETTINGS
After CSR and White Balance are performed, adjust settings, aperture and/or lighting to get a
good exposure. A CSR must be performed after any camera settings are adjusted.
'ARM' CAMERA
Click the 'Capture' button to start recording to the camera's internal RAM memory buffer.
TRIGGER
At the end of the action, click the 'Trigger' button at the bottom of the 'Live' panel provide an
external trigger signal (TTL pulse) via the Trigger connector.
PLAYBACK AND EDIT CINE
Click the 'Play' tab to Scrub through the timeline or use the 'Video Control' buttons to locate
the first image to be saved.
Click the 'Mark-in'
Locate the last image of the Cine to be saved and then click the 'Mark-Out'
button.
Step 2: Right click the CSR button in the live tab,
and select "Set Default CSR"
Chapter 3: Quick Star t Guide | 11
button.
Advertisement
