Completing The Installation; Technical Support - Christie CP4315-RGB Replacing

Completing the installation

After replacing the diffuser and depolarizer, re-install the projector components and complete laser
configurations.
1. Re-install the integrator assembly and other projector components removed to access the
integrator assembly.
2. Complete the following laser configurations:
• Run LiteLOC calibration.
See the "Performing the LiteLOC
board instruction sheet (P/N: 020-103100-XX) or LiteLOC
projectors instruction sheet (P/N: 020-103436-XX).
• Create or adjust the laser configuration files.
• Create MCGD files.
• Create PCT files, if applicable.

Technical support

Technical support for Christie Cinema products is available at:
• Support.cinema@christiedigital.com
• +1-877-334-4267
• Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com
Replacing the Cinema 4K-RGB Diffuser and Depolarizer Instruction Sheet
020-103544-05 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Replacing the Cinema 4K-RGB diffuser and depolarizer
™ v1 calibration" topic in the Upgrading the color sensor
™ calibration for cinema
7