Christie CP4315-RGB Replacing page 2

5. Using a 3 mm driver, remove the three top screws and lower left screw securing the rear card
cage security bracket.
Using a 2.5 mm driver, remove the lower right screw securing the rear card cage security
bracket.
6. Remove the bracket.
7. Disconnect the diffuser harness (J135) from the diffuser interface board (DIB).
Replacing the Cinema 4K-RGB Diffuser and Depolarizer Instruction Sheet
020-103544-05 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Replacing the Cinema 4K-RGB diffuser and depolarizer
2