RT540E SERVICE MANUAL
•
Frame application areas are; hose ends and fittings, all
unpainted fasteners and hardware, all bare metal
surfaces, outrigger pads, and back up alarm hardware.
•
Superstructure applications are; hose end and fittings,
wire rope on hoist roller tensioning springs on hoists, all
unpainted fasteners and hardware, valves, slew ring
fasteners and all bare metal surfaces.
GROVE
•
Boom applications areas are; pivot pins, hose end and
fittings, jib pins and shafts, all bare metal surfaces,
headache ball pins/ hook block pins and fasteners.
•
All hardware, clips, pins, hose connections not painted
will have treatment applied.
Published 4-20-2015, Control # 502-01
LUBRICATION
9
9-27
Need help?
Do you have a question about the Grove RT540E and is the answer not in the manual?