Tires & Wheels; Tire Inflation; Tire Damage - JLG 1250AJP Operation And Safety Manual

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
19. Optional Fuel Filter/Water Separator
Lube Point(s) - Replaceable Element
Interval - Drain water daily; Change every year or 600 hours of
operation
7-34
7.4 TIRES & WHEELS

Tire Inflation

The air pressure for pneumatic tires must be equal to the air pres-
sure that is stenciled on the side of the JLG product or rim decal
for safe and proper operational characteristics.

Tire Damage

For pneumatic tires, JLG Industries, Inc. recommends that when any
cut, rip, or tear is discovered that exposes sidewall or tread area cords
in the tire, measures must be taken to remove the JLG product from
service immediately. Arrangements must be made for replacement
of the tire or tire assembly.
For polyurethane foam filled tires, JLG Industries, Inc. recommends
that when any of the following are discovered, measures must be
taken to remove the JLG product from service immediately and
arrangements must be made for replacement of the tire or tire
assembly.
• a smooth, even cut through the cord plies which exceeds 3
inches (7.5 cm) in total length
• any tears or rips (ragged edges) in the cord plies which
exceeds 1 inch (2.5 cm) in any direction
• any punctures which exceed 1 inch in diameter
3121170