JLG 1250AJP Operation And Safety Manual page 54

12. Soft Touch/SkyGuard Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
13. Platform Rotate
Allows the operator to rotate the platform to the left or right.
14. Jib Stow Override
Allows the operator to swing the jib to the right past the
electronic stop to stow the jib beside the boom for trans-
port.
15. Function Speed Control
Controls the speed of Boom and Swing Functions. Rotate
CCW for slower speed and CW for faster speed. To adjust to
creep, turn knob fully CCW until it clicks.
3121170
SECTION 3 - MACHINE CONTROLS AND INDICATORS
NOTE: To operate the Main Lift/Swing Joystick, pull up on the locking
ring below the handle.
NOTE: The MAIN LIFT/SWING control lever is spring-loaded and will
automatically return to neutral (OFF) position when released.
16. Main Boom Lift/Swing Controller
An infinitely proportional dual axis joystick is provided for
main lift and swing. Push forward to lift up, pull backward to
lift down. Move right to swing right, move left to swing left.
3-13