JLG 1250AJP Operation And Safety Manual page 53

SECTION 3 - MACHINE CONTROLS AND INDICATORS
6. Main Telescope
Allows extension and retraction of the main boom.
7. Lights (If Equipped)
Operates accessory light packages if the machine is so
equipped.
8. Jib Lift
Push forward to lift up, pull back to lift down. Variable lift
speed is accomplished by using the Function Speed Control.
9. Soft Touch/SkyGuard Override Switch (If equipped)
The machine can be equipped with one of three options. It
may have Soft Touch, SkyGuard, or both Soft Touch and Sky-
Guard.
If equipped with Soft Touch, the switch
enables the functions that were cut out
by the Soft Touch system to operate
again at creep speed, allowing the
operator to move the platform away from the obstacle that
caused the shutdown situation.
3-12
If equipped with SkyGuard, the switch
enables functions cut out by the Sky-
guard system to be operated again,
allowing the operator to resume use of
machine functions.
If equipped with both Soft Touch and
SkyGuard, the switch operates like
described above and allows the opera-
tor to override the system that has
experienced a cutout situation.
NOTE: The Jib Swing function is not operable when the Capacity Select
control is in the 1000 lb. (454 kg for ANSI markets and 450 kg
for CE and Australia markets) position.
10. Jib Swing
Allows the operator to swing the jib to the left or right.
11. Tower Boom Lift
Allows raising and lowering of the tower boom by activating
the tower lift and telescope cylinders as dictated by the
Boom Control System.
3121170