Chapter 4: Advanced Functions; Enabling The Web Server; Using The Web Interface; Using Star Codes - Cisco WIP310 User Manual

Chapter 4
Chapter 4: Advanced
Functions
This chapter contains information about advanced phone
functions
WARNING:
Do not edit any of the advanced
phone settings described in this chapter unless
directed to do so by a technical support person
from your Internet Telephony Service Provider
(ITSP) or your Value Added Reseller (VAR)

Enabling the Web Server

Enabling the web server allows the phone to be configured
using a web browser
NOTE: Most phone configuration is done using
the phone However, enabling this setting
allows system administrators to use the web
browser to configure advanced settings
To enable the web server:
Settings > Misc Settings
1 In the Home screen, press the
Settings
2 Press the Select button and scroll to navigate to Misc
Settings
3 Press the Select button to see the Misc Settings
options
4 To Enable Web Server, press the
key to select ON or OFF
Select button (check mark icon) to confirm
5 Press the
or press the Cancel soft key to exit without changes
Press the Back soft key to move back one screen Press the
Power/End Call button to return to the Home screen
Wireless-G IP Phone
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Select button to choose
Left or Right Arrow

Using the Web Interface

1 Obtain the IP address of your phone by pressing the
Options softkey Scroll to Phone Info and press the
Select button
2 On your PC, open Internet Explorer
3 Enter the IP address of your phone in the browser's
toolbar
4 The Info page of the Wireless-G IP Phone Web Interface
displays
You can configure some of your phone settings, such
as call forwarding and Do Not Disturb, using the web
interface See the sections on those settings in this guide
for more information

Using Star Codes

The WIP310 supports numerous "star codes" to access
phone supplementary services These codes, which start
with *, are entered before dialing a telephone number
and provide services For example, to block caller ID (star
code 67), you would dial *67, followed by the telephone
number you are calling
Following is a list of supported star codes:
Advanced Functions
26