4. Operating
4.3.14 Firmware upgrade
The Firmware Upgrade screen is only available in administration mode. It can be used to replace the firmware
on the T
F
SCN with a newer version.
RANS
ORM
The upgrade software can be found on the T
F
SCN CD R5976969 or the Barco support will provide you
RANS
ORM
with it. The file needs to be of the format firmware-scn.2.0.X.XX.tar.gz. Click on the Browse button to
select this file and afterwards on the Upload button to start the upgrade.
Do not reboot the TransForm SCN, it will reboot automatically after upgrading the firmware.
Figure 4-18
T
F
SCN web interface – firmware upgrade, only in administration mode
RANS
ORM
_______________________________________________________________________________________________
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
4-23