Remote Pointer - Barco TransForm SCN User Manual

4.2 Remote pointer

The graphics output of the host PC can not only be compressed and streamed, it is also possible to use the re-
mote pointer functionality of T
Mode of operation
The remote pointer functionality offers a method to interact with the host PC without using its own mouse and
keyboard. There are two manners to do so:
•
Usage of a PC which is a client computer for Barco's wall management software A
A version 1.8 SR1 on)
POLLO
•
Usage of mouse and keyboard of a PC via the T
This manual describes only the latter. For an instruction of remote pointer with A
user's manual.
The mouse and keyboard signal of the master PC is transferred over the LAN to the T
T F SCN transforms the received signal to a USB coded signal and sends it over a USB cable to the host PC,
RANS ORM
which reacts to the signal like to its own keyboard and mouse.
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
F SCN to remotely interact with the content of the screen.
RANS ORM
RANS
with Streaming Video Card decoder
TCP/IP LAN
Host PC
Image generator
TransForm SCN
Encoder
DVI
USB for remote control
________________________________________________________________________________________________
F SCN web interface (master PC)
ORM
Wall controller
Master PC
Remote pointer
4. Operating
(FRG viewer from
POLLO
please refer to the A
POLLO
F SCN. The
RANS ORM
Figure 4-3
Configuration for remote pointer
POLLO
4-3