Table of Contents
Advertisement
4.3.9 Keyboard & mouse – Remote pointer
The Keyboard & Mouse section is used to configure and use remote pointer. Keyboard and mouse of the master
PC control may remotely control the content of the screen of the host PC.
To enable remote keyboard and mouse a USB connection between TransForm SCN and the
host PC has to be established!
Extensive information about remote pointer can be found in section
The overview screen USB Interface Status shows the status of the remote pointer. How to use the remote
pointer is explained below. To enable or disable and to configure the remote pointer, please refer to section
4.3.10 Keyboard & mouse – Settings
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
below.
T
_______________________________________________________________________________________________
F
SCN web interface – keyboard & mouse – USB interface status
RANS
ORM
4. Operating
4.2 Remote
pointer.
Figure 4-12
4-16
Advertisement
Table of Contents
