Network Settings - Barco TransForm SCN User Manual

4.3.4 Network settings

Within network settings the settings for the network connection of T
Fast interface settings
The fast interface settings screen serves to configure and view network settings of the T
MAC address
IP origin
IP address
IP subnet mask
Route
DHCP
IGMP version
T F
RANS ORM
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
MAC address of the device
static or DHCP
IP address of the T
RANS
IP subnet mask of the T
IP default gateway T
RANS
Enabled or Disabled.
If enabled, DHCP is used to assign an IP address to T
It is advisable to enable DHCP, if a DHCP server is used within the network.
Shows the IGMP version used in the network; IGMP v1, IGMP v2 and IGMP v3 is
possible
SCN web interface – Network – Fast interface settings in administration (left) and standard user (right) mode
________________________________________________________________________________________________
F
RANS ORM
F SCN; only selectable, if DHCP is disabled
ORM
F SCN; only selectable, if DHCP is disabled
RANS ORM
F SCN uses in case that DHCP is disabled
ORM
4. Operating
SCN are configured.
F SCN.
RANS ORM
F SCN.
RANS ORM
Figure 4-6
4-8