Table of Contents
Advertisement
3. Getting started
3.2.4 Remote Pointer
To operate the screen of the host PC its local mouse and keyboard can be used. Furthermore to remotely control
the screen also the mouse and keyboard of the master PC can be used. Mouse and keyboard signals are trans-
ferred over the LAN to the T
F
SCN. The T
F
SCN transforms the signal to a USB signal and sends it
RANS
ORM
RANS
ORM
over a USB connection to the host computer. For the USB connection a suitable USB cable is included in delivery.
Connection
Plug the USB connector type B (more quadratic shape) of the cable into the USB jack [11] of the T
F
SCN.
RANS
ORM
Plug the other side of the USB cable (connector type A, flat rectangular shape) into an USB jack of the host PC.
Figure 3-5
connection of remote pointer – USB cable
The master PC and the T
F
SCN have to be connected to the same LAN.
RANS
ORM
Please refer also to section
4.2 Remote pointer
for the usage of remote pointer.
________________________________________________________________________________________________
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
3-6
Advertisement
Table of Contents
