Table of Contents
Advertisement
All interface settings
On the all interface settings screen the settings for default gateway IGMP Version and the server port can be
found and a user defined name can be assigned.
IP Default Route
Force IGMP Version:
Auto
IGMP v1
IGMP v2
IGMP v3
Server Port
Custom name
Use the default board name
T
F
RANS
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
IP default gateway T
Auto should be selected, in user mode the used version is displayed
same version is used as in the network
version 1 is used
version 2 is used
version 3 is used
Port for communication (commands, changing parameters, etc.) between
T
F
SCN and master PC
RANS
ORM
Default is 6666
user defined name can be entered here (max. 31 characters), please see below
checked
Default setting, the standard name BARCO TransForm SCN Encoder
is used. TransForm SCN is displayed on top of the page.
unchecked A user defined name can be assigned to the T
Behind the standard name the user defined name is displayed in
brackets.
SCN web interface – Network – All interface settings in administration (left) and standard user (right) mode
ORM
________________________________________________________________________________________________
F
SCN uses in case that DHCP is disabled
RANS
ORM
4. Operating
F
SCN.
RANS
ORM
Figure 4-7
4-9
Advertisement
Table of Contents
