Installing A Bnc Coax Adapter - HP Vectra XM5 4 User Manual
Hp vectra xm5 4: users guide
Hide thumbs
Also See for Vectra XM5 4:
- Technical reference manual (55 pages) ,
- Supplementary manual (33 pages) ,
- Install manual (28 pages)
Table of Contents
Advertisement
INSTALLING A BNC COAX ADAPTER
Your PC is supplied with an pre-installed network board with a UTP (Unshielded Twisted Pair)
connector. You can install a BNC Coax connector onto this board. Order HP part number
D3979A.
Follow this procedure to install a coax adapter connector:
1
Disconnect the PC's power supply cord and any connection to a telecommunications
network.
2
Remove the PC's cover.
3
From inside the PC, push out and remove the metal plug on the network board to expose
the hole for the coax connector.
Hide quick links:
Advertisement
Table of Contents
