HP Vectra XM5 4 User Manual page 77

3 Ensure that the clip is in place and holds the battery firmly.
You can also install an external battery (HP part number 1420-0513), which you can order from
your authorized reseller.
Install the external battery as follows:
1 After removing the computer's cover, connect the external battery cable to the battery
connector on the system board.
2 Mount the external battery on the backplane, using the self-adhesive strip supplied.
After installing either a replacement or an external battery, replace the computer's cover and
run the Setup program to reconfigure the computer.
WARNING:
There is a danger of explosion if the battery is
incorrectly installed. For your safety, never
attempt to recharge, disassemble, or burn the old
battery. Replace the battery only with the same
or equivalent type recommended by the
manufacturer. The battery in this PC is a lithium
battery which does not contain heavy metals,
nevertheless, in order to protect the
environment, do not dispose of batteries in
household waste. Please return used batteries to
the shop from which you bought them, or to the
dealer from whom you purchased your PC, or to
HP, so that they can either be recycled or
disposed of in an environmentally sound way.
Returned used batteries will be accepted free of
charge.