HP Vectra XM5 4 User Manual page 59

Setup Item
Integrated Flexible Disk Controller
Flexible Disks
Write on Flexible Disks
Integrated IDE Controllers
Hard Disks/CD-ROM
Hard Disk Boot Sector
Integrated Data Communication Ports
Serial Port A
Serial Port B
Parallel
Integrated Ethernet Interface
Network Access
Hardware Protection Submenu (Security group)
Default*
[Enabled]
[Enabled]
[Enabled]
[Not
protected]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Action
Disables access to the flexible disk drives to
prevent users from copying confidential
information to a diskette or from reading files that
could affect the integrity of your computer or your
network.
Select 'Disabled' to prevent users from copying
confidential information to a diskette.
Disable access to the Hard Disks or CD-ROM to
protect them from use. This is useful when you
want to make the information on the drives
temporarily unavailable.
Write-protects the boot sector of your hard disk.
This helps to protect against viruses.
Disable access to the port to protect the integrity
of your computer.
Disable Network Access to prevent users from
copying confidential information from the network.
(The network interface configuration remains the
same.)