NOTE
•
The
or
arrows, [TAB] and [SHIFT] or [TAB] keys can be used to select fields in the
current menu.
•
The [PAGE UP] key moves to the previous page and the [PAGE DOWN] key moves to
the next page in a scrollable menu.
•
The [HOME] key moves to the top item, and the [END] key moves to the bottom item, of
the current menu.
•
Within a field [F7] selects the next lower value and [F8] selects the next higher value.
•
[ENTER] displays a sub-menu for menu items marked with a solid right arrow.
•
[ESC] or [ALT] + [X] allows you to exit from a sub-menu.
•
The
and
•
[F9] loads factory-installed default values.
•
[F10] restores previous values from CMOS.
•
[F1] or [ALT] + H displays the general help screen.
•
[ESC] exits from the general help screen.
•
Use the [F12] key to exit Setup without saving any changes.
•
Use the [F3] key to save your settings and exit Setup.
Pressing the
or
menu option. If, however, you are on a sub-menu screen and you press these arrows, you will
stay on that screen.
Use the
and
arrow keys to scroll through the items on the general help screen.
UNDERSTANDING THE SETUP PROGRAM
The built-in Setup program is accessed by pressing [F2] during the PC's Power-On-Self-Test.
Online help is provided at the right hand side of the Setup screen for each item on the Setup
screens. When you highlight an item, the help for that item is displayed.
The Setup program is menu-driven. Options are grouped in the following categories:
•
Main (refer to "Main Menu Items" in this chapter)
•
Configuration (refer to "Configuration Menu Items" in this chapter)
•
Security (refer to "Security Menu Items" in this chapter)
•
Power (refer to "Power Menu Items" in this chapter)
•
Exit (refer to "Exit Menu Items" in this chapter).
In addition to the Exit menu, you can also use the
[F3] key to save your settings and exit the Setup
program.
arrows select menus from the menu bar.
arrow keys while you are on a main menu screen will take you to the next