If The Date And Time Are Incorrect; If You Have A Network Problem; Changing The Battery - HP Vectra XM5 4 User Manual

IF THE DATE AND TIME ARE INCORRECT

The date and time can be incorrect for the following reasons:
• the time has changed for the seasons
• the PC has been unplugged from the power too long, and the battery is discharged.
To change the date and time use the HP User Tools program for Windows 3.11 and Windows
95. You can also use the Setup program to change the date and time.

IF YOU HAVE A NETWORK PROBLEM

If you have a problem with your PC's network, run the HPIEDIAG utility (provided on the
diskette that contains the LAN drivers, supplied with your PC):
1 Insert the diskette containing the HPIEDIAG utility in drive A.
2 Make drive A the current drive by typing: A: [ENTER]
3 Change to the DIAG directory by typing: CD \DIAG [ENTER]
4 Start the HPIEDIAG utility by typing: HPIEDIAG [ENTER]
Follow the instructions on the screen.
Then check the configuration of the integrated Ethernet interface using the Setup program
(refer to "Configuring Your Network Connection" in chapter 3).

CHANGING THE BATTERY

Special care is needed in changing the battery. Instructions for changing the battery are given
below.
You should order replacement battery HP 1420-0314 from your local Sales and Service office,
or a Rayovac 2325/2335 or Mitsubishi BR2325/BR2335, either of which is available from most
local stores.
After removing the computer's cover:
1 Remove the old battery by gently sliding it from under the retaining clip.
2 Place the new battery in the battery holder, with the cross uppermost, and ensure that it is
properly seated.