HP Vectra XM5 4 Install Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. Vectra XM5 4
  6. Install manual
HP Vectra XM5 4 Install Manual

HP Vectra XM5 4 Install Manual

Installing novell netware drivers
Hide thumbs Also See for Vectra XM5 4:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Network Manual

Installing Novell NetWare Drivers

Network Administrator Guide
HP Vectra XM 5/xxx Series 4

Advertisement

Table of Contents
loading

Related Manuals for HP Vectra XM5 4

Summary of Contents for HP Vectra XM5 4

  • Page 1: Installing Novell Netware Drivers

    Installing Novell NetWare Drivers Network Administrator Guide HP Vectra XM 5/xxx Series 4...
  • Page 2 Installing Novell NetWare Drivers Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 3 This document explains how to install the Novell NetWare Open Data Link Interface (ODI) drivers required to use the PC with a Novell NetWare LAN. If the PC is supplied with the HP LAN Disk, use this disk to install the • LAN drivers.

  • Page 4: Odi Dos Client Driver

    For more information about the NET.CFG file, refer to the Novell NetWare manuals and to page 24. NOTE When the DOS ODI driver is used, it will locate the HP Enhanced PCI Ethernet Interface and read its settings automatically. English...
  • Page 5 Novell diskette and insert the LAN Disk. Press the Network Board window. 4 Select A:\NOVELL\DOSCLNT 5 The line HP Enhanced PCI Ethernet Interface highlighted. Press Installing Novell NetWare Drivers ODI DOS Client Driver when asked if you want to allow...
  • Page 6 The ODI driver default frame type is ETHERNET_802.2. NetWare 286 and 386 servers use frame type ETHERNET_802.3 as their default, but NetWare 4.0 uses both ETHERNET_802.2 and ETHERNET_802.3 types. The HP Enhanced PCI Ethernet Interface supports both Ethernet frame types. English...
  • Page 7 1 To begin the installation you require the Novell DOS Shell installation diskette labeled 'WSGEN' and the LAN Disk. 2 Create a directory on the DOS boot drive (for example C) for the HP and NetWare files using the following commands at the DOS prompt: MKDIR C:\NOVELL 3 Copy the DOS ODI Driver and NET.CFG File.
  • Page 8 Installing Novell NetWare Drivers ODI DOS Client Driver Starting a NetWare Client To start a NetWare client, execute the following commands at the DOS prompt: 1 Change to the directory where the required files are located (for example 2 Type: PCNTNW IPXODI and either,...

  • Page 9: Odi Os/2 Client Driver

    ODI OS/2 Client Driver An OS/2 computer gains access to NetWare servers by using the Requester for OS/2. The Requester needs the OS/2 ODI driver to enable it to use the Enhanced PCI Ethernet interface to access the LAN medium. The OS/2 ODI driver PCNTNW.OS2 directory.
  • Page 10 Installing Novell NetWare Drivers ODI OS/2 Client Driver Installing OS/2 To install from the NetWare Requester disk, follow the steps below: Requester from 1 Insert the NetWare Requester diskette into the drive and run the NetWare Requester INSTALL program. For example, if the diskette is in drive A, then Disk type the following commands: INSTALL...
  • Page 11 Installing OS/2 To install from the NetWare Requester disk, follow the steps below: Requester from 1 Insert the NetWare WSOS2_1 diskette into the drive and run the NetWare WSOS2_1 INSTALL program. For example, if the diskette is in drive A, then Disk type the following commands: INSTALL...
  • Page 12 Edit the NET.CFG file to match the HP Enhanced PCI Ethernet Interface configuration (refer to “Sample NET.CFG File” on page 26 if necessary). Create a link driver section for the HP Enhanced PCI Ethernet Interface as shown below: LINK DRIVER PCNTNW BUSTYPE PCI1 FRAME ETHERNET_802.3...

  • Page 13: Odi Driver For Windows For Workgroups Clients

    Installing Novell NetWare Drivers ODI Driver for Windows for Workgroups Clients ODI Driver for Windows for Workgroups Clients Windows for Workgroups is designed to support file and print sharing with multiple types of servers at the same time, such as Novell and Microsoft.
  • Page 14 • The NetWare Client for DOS Requester (VLM.EXE). • The LAN Disk for the HP Enhanced PCI Ethernet Interface. • 2 Windows for Workgroups must be installed to allow the Novell client to install its Windows support. However, the Windows for Workgroups network setup requires the Novell client to be installed to complete the configuration successfully.
  • Page 15 To connect to both Novell and Microsoft servers then go to the steps given under refer to the steps given under “Connecting to Novell and Microsoft Servers” on page 16 Installing Novell NetWare Drivers ODI Driver for Windows for Workgroups Clients Insert The Driver Disk HP Enhanced PCI Ethernet Interface window English...
  • Page 16 Installing Novell NetWare Drivers ODI Driver for Windows for Workgroups Clients Connecting to Novell To configure Windows for Workgroups for connection to Novell servers: Servers Only 1 Select 2 Choose the network only 3 Highlight the above) 4 Select 5 Select software untouched.
  • Page 17 Add Adapter... Unlisted or Updated Network Adapter in the Path field of the Install Driver window. A:\WFW311\ HP Enhanced PCI Ethernet Interface . If this line does not appear then refer to “Windows for at the Network Drivers window. Close in the Network Setup window.
  • Page 18 OEMSETUP.INF file). To correct this situation and allow installation of the ODI driver from the LAN Disk, any copies of the HP OEMSETUP.INF file from previous installation attempts must be deleted from the Windows directory.
  • Page 19 A:\NOVELL\NTCLNT\ button. Continue 4 Select the line HP Enhanced PCI Ethernet Driver 5 Some more files are copied from the LAN Disk. Select to any configuration questions. 6 Follow the remaining Novell instructions for the installation of the NT requester.

  • Page 20: Parallel Transferring Odi Dos Client Driver

    Installing Novell NetWare Drivers Parallel Transferring ODI DOS Client Driver Parallel Transferring ODI DOS Client Driver The Parallel Transferring ODI DOS Client Driver is a high performance, optimized version of the ODI driver for DOS. It achieves extra performance by utilizing the LAPP capability of the Enhanced PCI Ethernet Interface.
  • Page 21 Novell diskette and insert the LAN Disk. Press the Network Board window. 4 Enter A:\NOVELL\LAPPCLNT 5 The line HP Enhanced PCI Ethernet Interface (LAPP) highlighted. Press Installing Novell NetWare Drivers Parallel Transferring ODI DOS Client Driver when asked if you want to allow...
  • Page 22 The ODI driver default frame type is ETHERNET_802.2. NetWare 286 and 386 servers use frame type ETHERNET_802.3 as their default, but NetWare 4.0 uses both ETHERNET_802.2 and ETHERNET_802.3 types. The HP Enhanced PCI Ethernet Interface supports both Ethernet frame types. English...
  • Page 23 1 To begin the installation you require the Novell DOS Shell installation diskette labeled 'WSGEN' and the LAN Disk. 2 Create a directory on the DOS boot drive (for example C) for the HP and NetWare files using the following commands at the DOS prompt: MKDIR C:\NOVELL 3 Copy the DOS ODI Driver and NET.CFG File.
  • Page 24 Installing Novell NetWare Drivers Parallel Transferring ODI DOS Client Driver Starting a Parallel Transferring NetWare Client To start a Parallel Transferring NetWare client, execute the following commands at the DOS prompt: 1 Change to the directory where the required files are located (for example 2 Type: PCLAPP...

  • Page 25: Net.cfg Options For Novell Netware

    Installing Novell NetWare Drivers NET.CFG Options for Novell NetWare NET.CFG Options for Novell NetWare For each workstation driver you configure, select a custom set of supported values from the PCnet configuration options. If a driver configuration is different from the default settings or if you are using multiple protocols, you should create a NET.CFG file.
  • Page 26 FDUP • NOTE For the HP Enhanced PCI Ethernet interface, the DMA, INT, and PORT are not required for the driver. In some cases, using these keywords would be a violation of the bus specification. Otherwise, all other keywords may be used with the PCnet Family.
  • Page 27 Sample NET.CFG File The following is an example NET.CFG file for the Enhanced PCI Ethernet interface: LINK DRIVER PCNTNW ;Specify bus type for the HP Enhanced PCI Ethernet interface. BUSTYPE PCI1 LED2 90 ;To change FRAME type to Ethernet_II FRAME Ethernet_II...
  • Page 28 Installing Novell NetWare Drivers NET.CFG Options for Novell NetWare English...

This manual is also suitable for:

Vectra xm5/xxx series 4

Table of Contents