How To Install Accessories In Your Pc; Stopping Your Pc; Hp User Tools; Hp Summary Screen - HP Vectra XM5 4 User Manual

2

HOW TO INSTALL ACCESSORIES IN YOUR PC

This chapter explains how to install accessories, such as extra memory, accessory boards, and
additional disk drives, in your PC.

STOPPING YOUR PC

Stopping the PC when using Windows 3.11
To stop the PC, make sure that you have exited all programs and then exited Windows before
pressing the power button on the control panel.
Stopping the PC when using Windows 95
To stop or shut down the PC:
1 Click on Start.
2 Click on Shut Down.
3 Click on Shut down the computer.
You can return the PC to full power mode by pressing the space bar.
Other Operating Systems
For other operating systems refer to the operating system manual for details of how to exit the
operating system.

HP USER TOOLS

If your PC has preinstalled software, you will find HP User Tools on your system. These tools
help you to both configure your system and improve the functionality of your PC. They include
such items as configuring printers and setting video modes.

HP SUMMARY SCREEN

The HP Summary Screen provides information about your PC's current configuration. To view
the Summary Screen, press [ESC] when the Vectra Logo appears during the Power-on-Self-
Test (POST). Refer also to "The HP Summary Screen and Setup Program" in chapter 3.

SUPPORTED HP ACCESSORIES

This chapter describes how to install memory, mass storage devices, and accessory boards in
your PC.
Refer to "Hewlett Packard Support and Information Services" (chapter 6) for information about
how to obtain an up-to-date list of supported devices.