Magnetek IMPULSE G+ Mini Technical Manual page 59

5.1.3.6 Fast Stop (H01.xx = 40 or 42)
Figure 5-12: H01.XX = 40 or 42 (Fast Stop) without DC Injection
Figure 5-13: H01.XX = 40 or 42 (Fast Stop) with DC Injection
5.1.3.7 Motor Rotation Change
This parameter allows you to change the motor direction without changing the motor leads.
Parameter
B03.04 Change Rotation
00 Normal Rotation
01 Exchange Phases
Name
Reverse motor direction
Function
IMPULSE
Range Default
00–01 00
®
•G+ Mini Technical Manual
November 2020
Page 59