Magnetek IMPULSE G+ Mini Technical Manual page 36

4.2.2.2 LO/RE LED and RUN LED Indications
No. LED
10
11
4.2.2.3 Function LEDs
No. Display
12
13
14
15
Lit
During run. During deceleration
to stop.
When a run
command is input
and frequency
reference is 0.
When run command --
is selected from
keypad (LOCAL).
Lit
When the VFD detects an
alarm or error
When the REVERSE command
is given
VFD Ready
Auto-Tuning
Displays output frequency (Hz) --
Flashing Flashing Quickly
During deceleration at a
fast-stop.
During stop by interlock
operation.
--
Flashing
When an alarm occurs
OPE detected
When a fault or error occurs
during Auto-Tuning
--
--
Off
During stop.
Run command is
selected from device
other than keypad
(REMOTE).
Off
Normal state (no fault or alarm)
When the FORWARD
command is given
Programming Mode
--
®
IMPULSE •G+ Mini Technical Manual
November 2020
Page 36