Magnetek IMPULSE G+ Mini Technical Manual page 3

Magnetek, Inc. (Magnetek) offers a broad range of radio remote control products, control products and variable
frequency drives (VFD), and industrial braking systems for material handling applications. This manual has been
prepared by Magnetek to provide information and recommendations for the installation, use, operation and service
of Magnetek's material handling products and systems (Magnetek Products). Anyone who uses, operates,
maintains, services, installs or owns Magnetek Products should know, understand and follow the instructions and
safety recommendations in this manual for Magnetek Products.
The recommendations in this manual do not take precedence over any of the following requirements relating to
cranes, hoists lifting devices or other material handling equipment which use or include Magnetek Products:
• Instructions, manuals, and safety warnings of the manufacturers of the equipment where the Magnetek
Products are used,
• Plant safety rules and procedures of the employers and the owners of the facilities where the Magnetek
Products are being used,
• Regulations issued by the Occupational Health and Safety Administration (OSHA),
• Applicable local, state or federal codes, ordinances, standards and requirements, or
• Safety standards and practices for the industries in which Magnetek Products are used.
This manual does not include or address the specific instructions and safety warnings of these manufacturers or
any of the other requirements listed above. It is the responsibility of the owners, users and operators of the
Magnetek Products to know, understand and follow all of these requirements. It is the responsibility of the employer
to make its employees aware of all of the above listed requirements and to make certain that all operators are
properly trained. No one should use Magnetek Products prior to becoming familiar with and being trained in
these requirements and the instructions and safety recommendations for this manual.
Product Warranty Information
Magnetek, hereafter referred to as Company, assumes no responsibility for improper programming of a VFD by
untrained personnel. A VFD should only be programmed by a trained technician who has read and understands
the contents of this manual. Improper programming of a VFD can lead to unexpected, undesirable, or unsafe
operation or performance of the VFD. This may result in damage to equipment or personal injury. Company shall
not be liable for economic loss, property damage, or other consequential damages or physical injury sustained by
the purchaser or by any third party as a result of such programming. Company neither assumes nor authorizes any
other person to assume for Company any other liability in connection with the sale or use of this product.
For information on Magnetek's product warranties by product type, please visit www.magnetekmh.com.
Improper programming of a VFD can lead to unexpected, undesirable, or unsafe operation or performance of
the VFD.
PRODUCT SAFETY INFORMATION
WARRANTY INFORMATION
WARNING
®
IMPULSE •G+ Mini Technical Manual
November 2020
Page 3