Magnetek IMPULSE G+ Mini Technical Manual page 107

Parameter Name
L01.03 Motor Overheat Alarm
Selection
00 Decel to Stop
01 Coast to Stop
02 Fast Stop by B05.08
03 Alarm Only (OH3 Flashes)
04 Stop by B03.03 Method
L01.04 Motor Overheat Fault Selection Operation when the motor temperature analog
00 Decel to Stop
01 Coast to Stop
02 Fast Stop by B05.08
03 Stop by B03.03 method
L01.05 Motor Temp Filter
L01.13 Overload Operation Selection
00 Disable
01 Enable
Operation when the motor temperature analog
input exceeds the OH3 alarm level. (1.17V)
(H03.02 or 10 = 0E)
input exceeds the OH4 fault level. (2.34V) (H03.02
or 10 = 0E)
Motor temperature analog input filter time constant
Determines whether or not to hold the
Electrothermal value when power is interrupted
Figure 5-27: Motor Protection Operation Time
Function
IMPULSE
Range Default
00–04 03
00–03 03
0.00– 0.20
10.00sec
00–01 01
®
•G+ Mini Technical Manual
November 2020
Page 107