Magnetek IMPULSE G+ Mini Technical Manual page 28

3.4.2.2 24VDC Interface Board Variation (Europe Only)
The standard 24VDC interface board includes terminals S1 - S7, but a variation is available in the European
market that replaces terminal S7 with terminal H2.
3.4.2.3 Terminal and Wire Specifications
The table below lists the wiring specifications for the terminals located on the interface card.
Terminal Symbol
S1-S7, X2, SC, RP, +V, A1,
A2, AC, HC, H1, H2, P1, P2,
PC, MP, AM, AC, S+, S-, R+,
R-, IG
MA, MB, MC
Figure 3-5: 24VDC Interface Board (Non-Standard)
Terminal Screw
M2
M3
Tightening Torque
in-lbs (N-m)
0.22 to 0.25
(1.9 to 2.2)
0.5 to 0.6
(4.4 to 5.3)
IMPULSE
Wire Range
2
AWG (mm )
Stranded: 24 to 18
(0.25 to 1.0)
Solid: 24 to 16
(0.25 to 1.5)
24 to 16
(0.25 to 1.5)
®
•G+ Mini Technical Manual
November 2020
Page 28