Table of Contents
Advertisement
2.7 Installing the GPU
1. Remove the riser card assembly from the blade chassis. Note that one screw is difficult
to see, as it is accessed through a hole in the bracket. (marked below as hidden)
2. Insert the GPU PCIe contacts into the riser card slot, while fitting the GPU into the
assembly.
3. Re-install the assembly into the blade chassis.
4. Connect the necessary PCIe cables and the power cable. The power cable must be
appropriate for the particular GPU model.
Riser Card
Assembly
Hidden
Screw
Figure 2-9. Installing the GPU
37
Chapter 2 Installation and Setup
Advertisement
Table of Contents
