Table of Contents
Advertisement
SuperBlade Server SBI-610P-1(C/T)2N User's Manual
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which
is available from Supermicro. A TPM/Port 80 connector is a security device that supports
encryption and authentication in hard drives. It allows the motherboard to deny access if the
TPM associated with the storage drive is not installed in the system.
Chassis Backplane Connector
Use J1 to connect to the system backplane. This connection provides Ethernet to the system
and CMM management.
Mezzanine Card Connector
JMEZZ1 connects to a backplane Ethernet add-on card expansion slot.
Front Panel Connector
Connect an FPC cable from J5 to the front panel module for power on/off, KVM, and other
system LED notifications.
Front Storage Module Connector
J6 is the front storage connector that connects to a SAS HBA/RAID, NVMe, or M.2 device.
Trusted Platform Module/Port 80 Header
Pin Definitions
Pin#
Definition
Pin#
1
P3V3
2
3
PCI-E_RESET_N#
4
5
SPI_PCH_CLK#
6
7
SPI_PCH_MOSI
8
9
JTPM1_P3V3A
10
54
Definition
SPI_TPM_CS_N
SPI_PCH_MISO
Ground
N/A
IRQ_TPM_SPIN_N
Advertisement
Table of Contents
