Installing Graphics (Gpu) Cards - Supermicro SUPERO SUPERSERVER 2027GR-TRF User Manual

Installing Graphics (GPU) Cards

The SC218G chassis supports four GPU cards, which are mounted in brackets to
fi t into the PCI-E 3.0 slots at the front of the chassis. Supported GPU cards include
NVIDIA M2090 and M2075.
Installing Graphics Cards
1. Identify the left and right brackets and graphics cards as illustrated below.
2. Insert the graphics cards into the brackets, aligning the mounting holes in the
graphics cards with the mounting holes in the brackets.
3. Secure each card to the bracket using the six screws which are included for
this purpose.
Figure 6-13. Installing GPU Cards into the Left and Right GPU Brackets
Left Side GPU Bracket
and Cards
4. Carefullly position each bracket in the chassis as illustrated below, aligning
the four mounting holes in the top and side of each bracket with the corre-
sponding mounting holes in the chassis.
5. Secure the bracket to the chassis by using the screws provided.
6. After a GPU card is installed, you must connect it to one of the following
power headers on the serverboard: JPW3, JPW4, JPW6, JPW7, JPW8 or
JPW11..
Chapter 6: Advanced Chassis Setup
Right Side GPU Bracket
and Cards
6-11
1
2