SuperBlade Server SBI-610P-1(C/T)2N User's Manual
C.2 Enabling NVMe RAID
RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server and press [DEL] key to enter BIOS.
3. Switch to Advanced > Chipset Configuration > North Bridge > IIO Configuration >
Intel® VMD Technology > Intel® VMD for Volume Management Device on Socket
for CPU1 & CPU2.
4. Select each VMD on the CPU and enable VMD mode for the NVMe device.
Figure C-2. BIOS, Enabling VMD Mode
94