Installing Gpu Expansion Cards - Supermicro SBI-7127RG-E User Manual

3-7

Installing GPU Expansion Cards

If you need to install GPU extension cards into the SBI-7127RG-E blade module, then
you must first remove the top cover, and then the Blade Module Front Assembly and
GPU PCI-E Expansion Card Bracket first (see
install GPU cards to the blade module.
Figure 3-15. Reassembling the Front Blade Assembly and Top Cover
Blade Module Front
Assembly with GPU
Card Bracket
Chapter 3: Setup and Installation
Figure 3-15). Use the procedure below to
Bottom Blade
Chassis
3-13
Top Cover
Retention
Brackets