Table of Contents
Advertisement
SuperBlade Server SBI-610P-1(C/T)2N User's Manual
2.6 Storage Drives
The blade has two 2.5" hot-swap storage drive bays. The drives are mounted in tool-less
drive carriers that simplify their removal from the chassis. These carriers also help promote
proper airflow. Carriers without drives must remain in the chassis for proper airflow.
For VROC configurations, refer to the VROC appendix in this manual.
Note: Enterprise level storage drives are recommended for use in Supermicro systems. For
information on recommended drives, visit the Supermicro
Drive Carrier Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator. For
RAID configurations using a controller, the meaning of the status indicator is described in
the table below. For OS RAID or non-RAID configurations, some LED indications are not
supported, such as hot spare.
Color
Activity
Blue
LED
Blue
Status
Red
LED
Red
Red
Red
Red
Green
Amber
Drive Carrier LED Indicators
Blinking Pattern
Behavior for Device
Solid On
SAS/NVMe drive installed
Blinking
I/O activity
Solid On
Failure of drive with RSTe support
Blinking at 1 Hz
Rebuilding drive with RSTe support
Blinking with two blinks
Hot spare for drive with RSTe support
and one stop at 1 Hz
(not supported in VMD mode)
On for five seconds,
Power on for drive with RSTe support
then off
Blinking at 4 Hz
Identify drive with RSTe support
Solid On
Safe to remove NVMe device
(not supported in VMD mode)
Blinking at 1 Hz
Attention state—do not remove NVMe device
(not supported in VMD mode)
30
website.
Advertisement
Table of Contents
