Installing The Linux Driver - HP StorageWorks A6826A Installation Manual

Installing the Linux driver

3
This chapter provides instructions for installing the Linux qla2300 driver for the A6826A HBA on an
already installed Red Hat Enterprise Linux (Red Hat EL) or SUSE Linux Enterprise Server (SUSE SLES)
for 64-bit Itanium systems.
The software kit for this HBA can be obtained from the HP web site:
http://h18006.www1.hp.com/storage/saninfrastructure.html.
To install the driver, you must be familiar with the operating system under which the HBA is to
operate, and have access to standard system documentation.
To install the driver, you must perform the following:
• Installing the driver kit, page 16
• Installing the driver on the boot drive, page 17
• Loading the driver, page 18
• Configuring the driver, page 20
A6826A PCI-X host bus adapter for Itanium Linux systems installation guide 15
Get other manuals https://www.bkmanuals.com