Operation In Automatic Mode; Master/Slave Mode - ProLights ARCLED3144RGBWA User Manual

10
EDIT CUSTOM 01-10
WHITE
CALIB1
RGB TO W
CALIB2
FANS
KEYLOCK

3.4 OPERATION IN AUTOMATIC MODE

If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [AUTO], then press the button ENTER.
• Press the button UP/DOWN to switch between the programs (AUTO 01 - AUTO10 o CUSTOM01 - CUSTOM10). The
unit will operate in automatic mode.
NOTE - Programs AUTO 01 - AUTO10 are fully pre-programmed and will not be altered by changes in EDIT
mode. Programs CUSTOM01 - CUSTOM10 are fully pre-programmed and can be edited in EDIT mode.
In automatic mode the unit will be set as Master.

3.5 MASTER/SLAVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
ARCLED3144RGBWA
SCENE 01-30
RED
GREN
BLUE
White 01-11
WHIT
AMBE
RED
GREN
BLUE
OFF
LOW
NORMAL
HIGH
AUTO
ON
OFF
RED
GREN
User can combine Red, Green, Blue,
BLUE 000 - 255 White and Amber to generate a
WHIT
AMBER
STRB 00 - 20
TIME
000 - 255
FADE
Modifies the color macros used in the
000 - 255
Defines the color temperature used
000 - 255
custom color
Select a strobe frequency
Defines the step duration
Defines the fade duration
TOUR personality
when COLO is set to RGbw
Select fan speed
Turns the password on or off