Identifying Video Boards On An Hp Kayak Xw - HP Kayak XW04 User Manual

Identifying Video Boards on an HP Kayak XW

Identifying Video Boards on an HP Kayak XW
The following diagram shows the two HP VISUALIZE video boards:
HP VISUALIZE fx6 video board (without an installed texture module)
Strengthening
bracket
If in doubt, check the part number of the board. The part number
(Replacement Part Number) is shown on the main AGP video board. The
part numbers are also listed in the HP Kayak PC Workstation Service
Handbook.
16
How can I identify the difference between an HP VISUALIZE fx6
video board and an HP VISUALIZE fx4 on the HP Kayak XW PC
Workstations?
The HP VISUALIZE fx6 video board has the following main
hardware differences: video board panel, strengthening
bracket, and a support bracket.
HP VISUALIZE fx4 video board (without an installed texture module)
HP VISUALIZE fx6 is: 5064-3657
HP VISUALIZE fx4 is: 5064-3301
Support bracket
Two terminator sockets are concealed beneath
this short strengthening bar. The longer of the
two sockets contains a terminator when no
texture module is installed.