Installing And Configuring The Hp Visualize Fx6 Driver; Installing The Opengl Video Driver - HP Kayak XW04 User Manual

NOTE

Installing and Configuring the HP VISUALIZE fx6 Driver

Installing and Configuring the HP VISUALIZE fx6 Driver
An OpenGL video driver is available for HP VISUALIZE fx6 video board for
use under Windows NT4.0 only. Without the appropriate drivers, the PC
Workstation will only operate in VGA mode, meaning that the 3D hardware
accessory will not be available.
Video drivers are regularly updated by Hewlett-Packard for feature and
performance improvements. When installing a driver, or diagnosing an error,
you are strongly recommended to check that you have the latest driver
version. These can be found on the HP World Wide Web site:
http//www.hp.com/go/kayaksupport

Installing the OpenGL Video Driver

Installation of the driver is done through the standard process:
Display Properties / Settings / Display Type
To check the driver version, click the About tab in the Display Properties
dialog box.
10
Installed fx6 driver
version
If the texture module
(optional upgrade,
part number D6795A)
is installed, it is also
displayed