Adjusting Salt Consumption - Sandstrom SDW60W14N Installation Instructions Manual

Adjusting Salt Consumption

Salt consumption must be adjusted to correspond to the water hardness level in your area. If
you don't know how hard the water in your home is, please ask the company that supplies water
in your area.
It is recommended that adjustments should be made in accordance with the following chart.
GB
German ˚dh
0-5
6-11
12-17
18-22
23-34
35-55
1˚dh (German degree) = 0.178 mmol/l
1˚fh (French degree) = 0.099 mmol/l
1˚Clark (British degree) = 0.142 mmol/l
To optimise your dishwasher for the local water hardness, please follow the steps below and
refer to the above table.
1. Press the
2. Press and hold the
periodically.
3. Press the
4. After adjusting the water hardness level, press the
32
Water Hardness
French ˚fh British ˚Clarke
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-60 29-42
61-98 43-69
On/Off button to switch on the dishwasher.
button for 5 seconds until the salt refill warning indicator will be on
repeatedly to adjust the water hardness level: H1 / H2 / H3 / H4 / H5 / H6.
Selector
Position
mmol/l
0-0.94 H1
1.0-2.0 H2
2.1-3.0 H3
3.1-4.0 H4
4.1-6.0 H5
6.1-9.8 H6
• Do not use everyday table salt or cooking salt as
they contain insoluble substances which could
damage the dishwasher.
• Do not pour detergent into the salt container. This
will damage the dishwasher.
On/Off button to save the setting.
Salt Consumption
(Gram/Cycle)
0
9
12
20
30
60