Specifications - ETC Sohrana Dual Tech Installation Manual

ETC Installation Guide
0–10 V Dimming Switch Sensor

Specifications

Note:
electrical equipment.
Electrical
120/277 VAC, 60 Hz, Inrush Maximum per pole, 80 A, 16.7 ms
Line
(Black)
Neutral
(White)
Neutral
(White)
Note:
Maximum Load
Ballast Electronic (LED) 500 W (VA) @ 120 VAC/ 800 W (VA) @ 277 VAC
•
Environment
Ambient temperature: -10°C–55°C (14°F–131°F)
•
Relative humidity: maximum 95%, non-condensing
•
Mounting
Install 90–150 cm (3–5 ft) above the floor
•
Dimensions 105x45x42 mm (4.13x1.77x1.65 in) including mounting
•
bracket
Note:
0–10 V Dimming Switch Sensor
Installation must follow all national and local codes for
Sensor
Line
(Red)
DIM +
(Violet)
DIM -
(Pink)
This equipment must be grounded for operation.
Install the sensor at least 0.3 m (1 ft) away from any occupant.
Green
(Ground)
Load
Page 4 of 12 ETC