FIC VA-502 Manual page 62

VA-502 Mainboard Manual
Doze Mode
When disabled, the system will not enter Doze mode. The specified time
option defines the idle time the system takes before it enters Doze mode.
The options are: Disabled (Default), 10, 20, 30, 40 sec, 1, 2, 4, 6, 8, 10, 20,
30, 40 min, 1h.
Suspend Mode
When disabled, the system will not enter Suspend mode. The specified time
option defines the idle time the system takes before it enters Suspend mode.
The options are: Disabled (Default), 10, 20, 30, 40 sec, 1, 2, 4, 6, 8, 10, 20,
30, 40 min, 1h.
VGA I/O & MEMORY
Selecting ON will enable the power management timers when a no activity
events is detected in the VGA. Selecting OFF to disable the PM
timer even if a no activity event is detected.
The options are: OFF (Default), ON.
LPT & COM I/O
Selecting LPT & COM will enable the power management timers when a no
activity event is detected in the LPT and COM ports. Selecting LPT (COM)
will enable the power management timers when a no activity event is
detected in the LPT (COM) ports. Selecting NONE to disable the PM timer
even if a no activity event is detected.
The options are: LPT & COM (Default), LPT, COM, NONE.
HDD & FDD I/O
Selecting ON will enable the power management timers when a no activity
event is detected in the hard disk drive and floppy disk drive. Selecting OFF
to disable the PM timer even if a no activity event is detected.
The options are: OFF, ON (Default).
46