VA-502 Mainboard Manual
RAM Module Configuration
(Unit : MB)
TOTAL
SIMM 1 & 2
MEMORY
(Bank 0)
8
4 & 4
16
8 & 8
4 & 4
32
16 & 16
8 & 8
64
32 & 32
16 & 16
128
64 & 64
32 & 32
256
64 & 64
128* & 128*
512
128* & 128*
NOTE :
1.
* A RAM module of this size was not available for testing at press time.
2.
DIM1 and DIM2 only support 3.3V (unbuffered) EDO and SDRAM
modules. It is recommended that SIMMs and DIMMs are not
installed at the same time on this mainboard to avoid unexpected
failure.
3.
The different size of DIM1 and DIM2 is allowed. For example, 16MB is
installed on DIM1 socket, 32MB is installed on DIM2 socket. DIM2
and SIMM 1&2 are shared. That is, It is not allowed to install RAM
modules on DIM2 and SIMM 1 &2 at the same time. This mainboard
allows the SIMMs (without ECC or parity check support) which
14
SIMM 3 & 4
DIM1
(Bank 1)
(Bank 2)
8
4 & 4
16
8 & 8
32
16 & 16
64*
32 & 32
64*
64 & 64
128* & 128*
DIM2
(Bank 0)
64*
|||||