Important Safety Instructions - Epever Tracer6210AN User Manual

Important Safety Instructions

Please reserve this manual for future review.
This manual contains all safety, installation, and operation instructions for the Tracer-AN series MPPT
solar controller ("controller" referred to in this manual).

Read all the instructions and warnings carefully in the manual before installation.

No user-serviceable components inside the controller; please do not disassemble or attempt to
repair the controller.

Mount the controller indoors. Avoid exposure to the components and do not allow water to enter the
controller.

Install the controller in a well-ventilated place; the controller's heat sink may become hot during
operation.

It is suggested to install appropriate external fuses/breakers.

Disconnect all PV array connections and the battery fuse/breakers before controller installation and
adjustment.

Power connections must remain tight to avoid excessive heating from a loose connection.

The entire system should be installed by professional and technical personnel.
Explanation of symbols

Please read related literature accompanying the following symbols to enable users to use the
product efficiently and ensure personal and property safety.

Please read the literature accompanying the following symbols.
Symbol Definition
TIP TIP: Indicates any practical advice for reference.
IMPORTANT: Indicates a critical tip during the operation, if ignored, may cause the
device to run in error.
CAUTION: Indicates potential hazards that may cause the device to be damaged if
not avoided.
WARNING: Indicates the danger of electric shock, if not avoided, would cause
casualties.
WARNING HOT SURFACE: Indicates the risk of high temperature, if not avoided,
would cause scalds.
Read the user manual carefully before any operation.
1