Important Safety Instructions - Epever Tracer-AN Series User Manual

Important Safety Instructions

Please reserve this manual for future review.
This manual contains all safety, installation, and operation instructions for the Tracer-AN
series MPPT solar controller ("controller" referred to in this manual).

Read all the instructions and warnings carefully in the manual before installation.

No user-serviceable components inside the controller; please do not disassemble or
attempt to repair the controller.

Mount the controller indoors. Avoid exposure to the components and do not allow
water to enter the controller.

Install the controller in a well-ventilated place; the controller's heat sink may become
very hot during operation.

It is suggested to install appropriate external fuses/breakers.

Make sure to switch off all PV array connections and the battery fuse/breakers before
controller installation and adjustment.

Power connections must remain tight to avoid excessive heating from a loose
connection.
Explanation of symbols

To enable users to use the product efficiently and ensure personal and property safety,
please read related literature accompanying the following symbols.

Please read the literature accompanying the following symbols.
Tips: Indicate recommendations that can be referred to.
IMPORTANT: Indicates a critical tip during the operation, if ignored, may cause the
device to run in error.
CAUTION: Indicates potential hazards, if not avoided, may cause the device
damaged.
WARNING: Indicates the danger of electric shock; if not avoided, it would cause
casualties.
WARNING HOT SURFACE: Indicates the risk of high temperature, if not avoided,
would cause scalds.
1