Epever Tracer6210AN User Manual page 14

Ventilation is highly recommended if mounted in an enclosure.
CAUTION
Step2: Remove the terminal protective cover.
Step 3: Connect the battery (Left) and PV (Right)
Disconnect the system in reverse order.
IMPORTANT
Tracer-AN series controllers have no battery reverse protection. Do not reverse the
battery during the wiring. Otherwise, the controller may be damaged.
WARNING
 During the wiring, please do not connect the circuit breaker or fuse. Ensure that
 A fuse whose current is 1.25 to 2 times the controller's rated current must be
CAUTION
 Please connect the inverter directly to the battery, not the controller's load side.
 When the lithium battery and the inverter are used together, connect the
the electrode polarity is correctly connected.
installed on the battery side with a distance from the battery no longer than 150
mm.
10